Technical Details
Engineered for demanding construction environments tested across temperature, impact, and moisture extremes.
PlasPlywood™ vs. Standard Plywood
See exactly why construction professionals are switching to PlasPlywood stronger, waterproof, and built to outlast every pour.
- ✕ Sticks to concrete requires chemical release agents
- ✕ Absorbs water warps, swells and deforms over time
- ✕ Breaks or cracks during formwork stripping
- ✕ Limited operating temperature — degrades in harsh weather
- ✕ Uneven concrete surface due to swelling and deformation
- ✓ Non-stick polymer surface no release agent needed
- ✓ 100% waterproof zero absorption, zero deformation
- ✓ Does not break during stripping reusable every pour
- ✓ Operates from −10 °C to +75 °C in any weather condition
- ✓ Smooth, even concrete finish guaranteed every time
- ✓ Flexible honeycomb core bends for circular formwork
- ✕ Only 3–5 reuses before disposal
- ✕ Frequent replacement drives up material cost per pour
- ✕ Chemical release agents required — additional expense
- ✕ Warping causes uneven pours, leading to rework costs
- ✕ High waste volume — poor recyclability
- ✓ 15–30 reuses per panel — up to 6× longer service life
- ✓ 3× more durable — significantly lower cost per pour
- ✓ No release agents needed — eliminates chemical cost
- ✓ Lighter than plywood — reduces transport & handling cost
- ✓ 100% loss-free recyclable — recovers material value at end of life
- ✕ Loses structural integrity when exposed to moisture
- ✕ Cracks and splinters under repeated impact loads
- ✕ Sensitive to storage — warps if stored in damp conditions
- ✕ Surface degrades after first few uses
- ✕ Short service life in heavy-duty construction
- ✓ Honeycomb (hexagonal) core absorbs impact without damage
- ✓ Fully waterproof — no moisture-related degradation ever
- ✓ Storable in any condition: heat, cold, rain or humidity
- ✓ Does not crack, splinter or break during or after use
- ✓ 3× more durable than standard plywood under heavy loads
- ✓ Springs back to original shape after bending — no permanent set
Why PlasPlyWood?
Fewer replacements, no release agents, no weather limits. PlasPlywood is built for the realities of the construction site.
It separates from the concrete without sticking.
PlasPlywood's 2nd-generation PP polymer surface naturally repels concrete, eliminating the need for chemical release agents. Stripping is clean, fast, and damage-free — every single time.
It conforms to circular shapes.
Thanks to its flexibility, it can be easily applied to curved and cylindrical structural elements. No additional shaping or special equipment is required for columns, walls, and circular geometries.
It works in all weather conditions.
Engineered to perform from −10 °C to +75 °C, PlasPlywood is unaffected by rain, humidity, frost, or heat. It can be stored outdoors without any protective covering and still delivers consistent results.
Long lifespan, low cost.
With up to 30 reuses per panel, PlasPlywood delivers 3× the service life of standard plywood. Less replacement means lower material costs, less waste on site, and a stronger return on every project.
See PlasPlywood In Action
Short clips from active construction sites real pours, real strips, real performance.
